TO-RYO

Controls indoor temperature and moisture. By controlling the environment of the room it extends the life of the house.

  • Features
  • Line Up

Easy installation

To install Ventilation Tiles the same procedure is used as that used to install general tiles. Aluminum Ventilation Parts can be attach and fixed to the Ventilation Tiles without constructing rafters or needing to reinforce building. The tiles can be attached and become waterproof by simply using attaching screws.

Beautiful design

“TO-RYO” and roof tile have the same appearance and shape, so it blends into the roof to give a good appearance. It also responds well to kiln modulation.

Durability in performance

“TO-RYO”is mainly composed of the following: ●Ventilation Roof Tile: Fiber Reinforced Cement with a thickness of 12mm for the Finished Baked Goods ●Aluminum Ventilation Parts: Aluminum with a thickness of 1.1mm~2.5mm・Anodized ●Fixing Screws: SUS×M7 or SUS410・ Processed with Sten guard, both are highly durable.

Waterproof performance

The structure of “TO-RYO” is quite simple but the shape is made to resist leakage.
When subjected to a wind and rain test (constant rain at 200mm/h with a wind speed of 60m/sec for 15 minutes), we found no leakage and it proved to have excellent wind and rain resistance.

Noncombustible performance

“Ventilation Tile” is noncombustible (Certification #NM-9133), it can be used for construction under Building Standards Law article 22. Also using “Aluminum ventilation material (and fixing material)”which has no legal regulation but has been constructed with over 1.1mm of aluminum rendering it noncombustible.

Ventilation performance

“TO-RYO” precise ventilation on hipped roof designed houses and square roof designs as well as other designs. This is because it can be used in combination with either uniformed ventilation ridge tiles or with the corner ridge internal ventilation type. The ridge ventilation design has succeeded in being efficient.

Designed to endure wind speeds of 60m/s

While ensuring ventilation openings, the Air Roof series demonstrates the strongest waterproofing and wind resistance performance.

Uniform design

Colors and textures have the same common tile pattern to make the design uniform.

Virtually permanent

No moving parts, natural ventilation style. No electricity and other power is needed.

Easy installation demonstrates performance

In summer, “TO-RYO” discharges heat from inside the attic. It also prevents condensation from forming in the winter. A comfortable home requires attic ventilation throughout all seasons.

Triangle ventilation tile 24.24 cm for the ridge

This “TO-RYO” corresponds to both “Air Roof ISHIME” and “Air Roof MOKUME” as a ventilation ridge tile. This type has the most beautiful appearance of all “TO-RYO” tiles. This also has the best waterproofing ability because it has a large water channel capacity and ventilation capacity by using a dual structure ventilation component and ventilation tile.

Round shaped ventilation ridge tile about 21cm

This “TO-RYO” corresponds to both “Air Roof SAZANAMI” and “Air Roof ONAMI” as a ventilation ridge tile. This type has the most beautiful appearance of all “TO-RYO” tiles. This also has the best waterproofing ability because it has a large water channel capacity and ventilation capacity by using a dual structure ventilation component and ventilation tile.

Corner ridge internal ventilation type

This “TO-RYO” corresponds to both “Air Roof ISHIME” and “Air Roof MOKUME” as a ventilation ridge tile. This type has the most beautiful appearance of all “TO-RYO” tiles. This also has the best waterproofing ability because it has a large water channel capacity and ventilation capacity by using a dual structure ventilation component and ventilation tile.

Waveform interior ventilation type

This interior ventilation type for the ridge “TO-RYO” corresponds any kind of roof. It is excellent in cost performance. It ventilates through the gaps of tiles on the roof ridge using Japan tile, ceramic tile, foreign tile, S-tile and Yamataka tile.

Roof board ventilation

Roof board ventilation corresponds to many different shapes of roofs.

TO-RYO ventilation tile

This is exclusively used only for the Roof Board Vent installation it has the same color and material as the “Air Roof ISHIME”. It can be installed on difficult roofs before the ridge ventilation material.